A Brief Guide to Water Heater Repair
A gas water heater is one of the most popular models on the market today. They are simple and very energy efficient when properly cared for. As with all appliances, a water heater needs to be periodically maintained in order to operate at peak efficiency. A basic maintenance procedure consists of changing the filter, checking and cleaning the vapor valves, checking the temperature control thermostat and also the burners. If any of these items is broken or damaged, the device will not only need to be serviced, but also repaired if that is necessary. You can learn about the water heater repair by reading this article.
Gas Water Heaters One of the simplest types of water heaters require little in the way of maintenance. However, to quickly determine the extent of damage, check the burners. A combustion appliance which burns gasoline like gas must often vent the exhaust fumes outside through a venting system similar to a chimney. If these elements are damaged or broken, the entire unit will need to be replaced. Note that you can call the Benjamin Franklin Plumbing experts to help you out.
Water Control Valve Repairs A popular type of repair includes replacing or repairing the gas control valve. This part, located close to the shut off handle on the tank, allows the gas flow to move from open to closed, or "on" to "off", thus regulating the flow of the water through the heater. As with other types of water heater repairs, the first step is to turn off the power to the device and then open all the faucets, toilets, and drains. Check all controls to make sure they are not damaged, and replace if needed. In some extreme cases, the float switch may need to be replaced due to cracks, corrosion or clogging.
Heating element Replacement If your water heater is damaged by either a loss of heat through the pilot light, a gas control valve malfunction, or a drain line break, the most common element to be replaced is the heating element. These heating elements generally have an automatic shut off feature that makes them self-contained, but it is still a good idea to have them inspected regularly. Leaks around the heating element can occur at anytime, so it is important to be aware of where the leak is taking place. You should also have the area around the leak checked for any visible damage, discoloration, or signs of rust.
Pipes Problems Getting hot water is essential in any household, and a damaged water heater may be to blame. In this case, you will need to replace the old plumbing and replace all of the pipes that it uses. In general, your gas supply pipe and the main sewer line will need to be repaired, as well as any faucet pipes that feed the kitchen or laundry. Any visible damage to these pipes will need to be inspected before you make a final decision on replacement.
The TPS Valve If your heating system stops working the way it should, you will first need to check to see if your water heater automatically shuts off the supply of gas before it gets too hot. If this is the case, you can simply locate the tp valve and turn it off. Also, if your heating system does not shut off by itself when the water to reach a certain temperature, you may need to find the exact same section of piping that the thermostat is connected to. With this type of repair, you will need to use a wrench to remove the gasket that surrounds the pipe.
Water Heater Repair: The Essential steps to keeping your water heater operating properly, even after an emergency repair. From turning off the gas to replacing the TPS valve, this article gives you all the instructions that you need to keep your system running smoothly. Keep in mind that basic troubleshooting for basic repairs is all that is needed, so before you begin any work you should do everything possible to avoid having to hire a professional. View here for more information on this subject: https://www.dictionary.com/browse/water-heater.
